News

Brief Introduction to Water Tank Drawing Machine

Details

Compared to other similar devices, the special feature of the water tank drawing machine is that the steel wire undergoes varying degrees of relative sliding with the coil during the drawing process. And during work, the steel wires, drums, drawing dies, etc. involved are immersed in cooling lubricant or sprayed with cooling lubricant. The water tank drawing machine (also known as the sliding multiple drawing machine) has the characteristics of reverse pulling force drawing. Its structure is simple, compact, occupies less space, is easy to operate, has high drawing speed, good cooling conditions, long mold service life, is environmentally friendly and dust-free, and the surface of the finished steel wire is clean and torsion free.

Operating procedures for water tank drawing machine equipment:
(1) Before starting up the water tank wire drawing machine equipment, it is necessary to check the equipment's air pressure, oil level, and the fastening and lubrication of the I-wheel winding machine to see if there are any problems. Additionally, the safety protection devices of the equipment should be intact and functioning properly.
(2) Before rolling, it is necessary to check whether the incoming materials meet the specified requirements, whether the quality is qualified, and whether the mold matching is appropriate.
(3) Open the water valve, fill the water tank with soap solution, and then close the inlet valve.
(4) Before starting the spool winding machine, it is necessary to check whether its air pressure is normal. Only after the air pressure is normal can we install the spool.
(5) If any abnormalities are found during the operation of the water tank drawing machine equipment, it should be stopped immediately for maintenance and troubleshooting.

Scan the QR code and use your phone to check

Back : Sorry nothing

Next : Techniques for Accurately Controlli

Back : Sorry nothing

Next : Techniques for Accurately Controlli